Ownice C800/C800 Pro with DSP + Wireless CarPlay

Mục lục

  • #122

Yes someone else reported it last week. They go by K6 model number and basically are updated Intel based version of the K2 with a DSP. Check the chart on this page for details.

  • #123

It turns out you have that Car Multimedia does not save the settings in the DSP module?

Record the video so that they can see that when you turn off and turn on Car Multimedia and the settings in the DSP are not saved, I think they will understand you.

[external_link_head]

P.S> Forgot to ask who you bought this Car Multimedia system ? Please give a link to the seller.

It saves all settings, except the delay. Although the delay setting is selected after the reboot, the sound is no delayed.

I´ve already made a video and the answer from Ownice was “you are doing it wrong”.

  • #124

It saves all settings, except the delay. Although the delay setting is selected after the reboot, the sound is no delayed.

I´ve already made a video and the answer from Ownice was “you are doing it wrong”.

“you are doing it wrong” – and then how to do it right? The Chinese Seller was tell how right do it, to work properly ?

  • #125

“you are doing it wrong” – and then how to do it right? The Chinese Seller was tell how right do it, to work properly ?

Just wrong, but not how to do it right. But I think they didn´t understand the problem. I´ve tried several ways, enter “tunne mode”, save the config to file, several combination of settings, but the delay is always lost after a full boot. The only way it worked is if the unit only sleeps (not full boot).

[external_link offset=1]

I´ve also upgraded to the latest firmware (OLS) and MCU (3.12)

The seller is the official ownice shop…

  • #126

It this radio a good replace for my actual Parrot Asteroid smart?

  • #127

Hi,

So I installed a K3 High in my Nissan Murano with the help of a Nissan mechanic. Everything works well, including 360 cameras. The only problem I have is that even at the lowest volume the radio app is incredibly loud and the is an audible hissing sound implying that the signal being sent by the Ownice radio is too loud. Does anyone know if there is some additional menu I can unlock to change this?

Thanks

  • #128

Have you looked in the DSP menu under the sound wave icon? Or this is not the best way to do it but you can lower the gain of each speaker under the speaker setup icon.

Oops, sorry I misread your question. Go to factory settings (from setting menu hit the gear icon and type 1260) then you can adjust the volume level for individual apps in the audio menu.

Last edited:

  • #129

Does anyone know of any way to play audio through USB from a phone (galaxy s9+) through the k3 high model? When I plug my phone in it doesn’t connect at all and the only way to get audio is through bt.

  • #130

Set the USB port on your phone to show up as external storage.

  • #131

Someone managed to root in K3 High 8 dsp?

———- Post added at 04:50 PM ———- Previous post was at 04:42 PM ———-Do you know how to enter developer mode?

[external_link offset=2]

  • #132

Set the USB port on your phone to show up as external storage.

I’ve tried that and it will only play stuff stored on the unit itself. I’m trying to do it like android auto and play tidal through my phone into the unit. Is that possible? If not I guess I can just hot spot and run tidal directly from the head unit.

  • #133

No that’s not going to work but the C800 is supposed to support mirrorlink. I’m not sure about the details but I believe there should be an app called easyconnect. You start it once with the phone connected through USB and after that you should be able to use it over wifi.

  • #134

Yeah I tried that and got nothing. Looks like it’ll be hot spot then.

  • #135

Can anyone please tell me on the 800 Pro, how the wireless CarPlay is please.. of of course you have the option on your version, many thanks

  • #136

This is from earlier in the thread. I don’t have an igizmo so no carplay for me and I still can’t install my K3pro. There is a “though” in his comment so you might want to PM him about it.

  • #137

Ah bless you, thank you so much!

  • #138

My wireless car works well. Some people complain of an echo. Would be good to see if there is an updated app for Zlink.

  • #139

Bless you, thank you for letting me know! ?

  • #140

Looks like the new Ownice C800/ C800 Pro units have been released.

Hello! . I would like Ownice C800 Pro whith DSP + Wireless car and everything necessary to install it in a Mercedes Sprinter CDI316 of 2014. Where can I get it.

Thank you.

Sincerely, Jose M

[external_footer]

Storedetailing

Storedetailing

Storedetailing - Hệ thống chăm sóc nâng cấp xe chuyên nghiệp

Leave a Reply

Your email address will not be published. Required fields are marked *